EP (Polyester/Nylon) Conveyor Belt

STANDARDS:
GB/T********1, DIN****2, BS**0, AS***2, RMA, JISK***2, SABS***3 etc.

Feature
It uses polyester canvas as carcass, and finished through the processes of calendering, firming and vulcanizing, etc.

With the advantages of thin belt with light weight, high tensile strength, fatigue and wear resistance, erosion resistance of water, steam, chemical, good impact resistance, excellent groove formation ability, low elongation, good stability ever heated and long service life, it's the developing trend of fabric conveyor belt. It is mainly used in harsh condition of long distance, heavy-load, high-chemical corrosive etc, it is especially suitable for transporting in moist environment.

TYPES
Besides General-used EP Belt, there are Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, Antistatic electricity type, and etc.

SPECIFICATION:
Intensity: **5N/mm_***0N/mm Width: **0mm_***0mm
Longitudinal full thickness tensil strength N/mm Fabric type Top cover thickness mm Bottom cover thickness mm Fabric plies Reference weight of rubber coated fabric, single ply kg/m2
******0 EP**0 3.0 *- 6.0 1.5 *- 3.0 ***8 1.3
*******0 EP**0 3.0 *- 6.0 1.5 *- 3.0 ***8 1.4
*******0 EP**0 3.0 *- 6.0 1.5 *- 3.0 ***8 1.5
*******0 EP**0 3.0 *- 6.0 1.5 *- 3.0 ***8 1.7
*******0 EP**0 3.0 *- 6.0 1.5 *- 3.0 ***8 1.8
*******0 EP**0 3.0 *- 6.0 1.5 *- 3.0 ***7 2.1

NOTE: BELT WIDTH, FABRIC PLIES AND LENGTH CAN BE MADE AS PER CUSTOMERS' REQUEST
MAIN DATA*-COVER RUBBER PROPERTIES(DIN****2)
Item Unit Cover rubber properties
W X Y Z
Tensile strength&#x***5; N/mm2 *8 *5 *0 *5
Elongation at break&#x***5; % **0 **0 **0 **0
Abrasion&#x***4; Mm3 *0 **0 **0 **0
MAIN DATA*-ADHESION(DIN****2)
Item Cloth to cloth
N/mm Rubber to cloth N/mm
Cover rubber&#x***4; 1.5mm Cover rubber>1.5mm
Highest &#x***4; *0 *0 *0
Average &#x***5; 5 3.5 4.5
Lowest &#x***5; 4 2.5 3.5

RECOMMENDED MINIMUM PULLEY DIAMETER (FOR INFORMATION ONLY)
Products Recommended minimum pulley diameter (mm)
2 plies 3 plies 4 plies 5 plies 6 plies 7 plies 8 plies
EP**0 **0 **0 **0 **0 **0 **0 ***0
EP**0 **5 **0 **0 **0 **0 ***0 ***0
EP**0 **5 **0 **0 **0 ***0 ***0 ***0
EP**0 **0 **0 **0 ***0 ***0 ***0 ***0
EP**0 **0 **0 **0 ***0 ***0 ***0 ***0
EP**0 **0 **0 ***0 ***0 ***0 ***0